RU talking about on the cab around the door opening? 1950 and up the
c-channel is spot welded to the inside of the cab, but on the bottom of the
door it is screwed on. Also the c-channel from 1947 to 1949 is held in
place with clips and screws on the cab.
Jon 50 3104
Chicago burbs
----- Original Message -----
From: "Terry Stellman" <STELLMAN@noex.com>
To: "oletrucks mailing list" <oletrucks@autox.team.net>
Sent: Monday, April 30, 2001 12:34 PM
Subject: RE: [oletrucks] Weatherstrip retainer to door
> The track around the door opening is spot welded on. I would think you
> could just spot weld it again or else use some small screws with a flat
> head.
>
> Terry Stellman
> 1949 3600
> Missouri City, Texas
>
>
> > -----Original Message-----
> > From: Jon Kunkel [SMTP:jonkunkel@home.com]
> > Sent: Monday, April 30, 2001 11:42 AM
> > To: oletrucks mailing list
> > Subject: Re: [oletrucks] Weatherstrip retainer to door
> >
> > Somebody must've tacked it on, as it should be screwed on. All
retainers
> > for rubber on the door are screwed on the bottom of the door.
> >
> > Jon 50 3104
> > Chicago burbs
> >
> > ----- Original Message -----
> > From: "Mark A. Self" <mark.self@verizon.net>
> > To: "oletrucks mailing list" <oletrucks@autox.team.net>
> > Sent: Monday, April 30, 2001 8:59 AM
> > Subject: [oletrucks] Weatherstrip retainer to door
> >
> >
> > > This channel is apparently spot welded in place. At least 2 of my
spot
> > weld
> > > s are broken. What is a way to repair this? Would JB weld be strong
> > > enough?
> > >
> > > ======================
> > > Mark Self
> > > '55 1st 5 window 3100
> > > Redlands, CA
> > > mark.self@verizon.net
> > > "Sentimental Journey"
> > > ======================
> > > oletrucks is devoted to Chevy and GM trucks built between 1941 and
1959
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|