Re: [oletrucks] carb flow rate?

[Roger.Gleason@uconn.edu]

Oh one other thing... My engine is a slightly modified 350 and I run the 73
jets. You would probably run 65 to 70 depending on the engine mods. We use
the 882 heads or the 993 heads un modified. Cam is 390/410 lift.
Roger Gleason Crew chief #81 Sportsman
51-AD 3100


                                                                                
              
                    mark@noakes.com                                             
              
                    Sent by:                    To:     
oletrucks@autox.team.net              
                    owner-oletrucks@auto        cc:                             
              
                    x.team.net                  Subject:     [oletrucks] carb 
flow rate?      
                                                                                
              
                                                                                
              
                    06/20/01 02:45 PM                                           
              
                    Please respond to                                           
              
                    mark                                                        
              
                                                                                
              
                                                                                
              




Does anyone know the flow rate of the 2-bbl Rochester used on the V8's
55-59?  The maximum rate would be ok, and the whole curve would be even
better.  I need to do some flow calculations to make sure that the original
carb will work on my engine given my intended use profile, ie, more
interested in low end torque and higher venturi velocities for better gas
mileage rather than high hp at high rpm.  Most modified small blocks are
overcarbureted anyway, but this might be going too far the other way.

Thanks,

Mark Noakes
58/56 Chevy Suburban
59 GMC Suburban
Knoxville, TN
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959