oletrucks
[Top] [All Lists]

Re: [oletrucks] door window opening trim

To: <CHARLES_A._CLARK@HUD.GOV>, <oletrucks@autox.team.net>
Subject: Re: [oletrucks] door window opening trim
From: "joe" <chevy1@jps.net>
Date: Wed, 21 Nov 2001 06:50:15 -0800
That outer trim around the door opening is held on with 1 little clutch tip
screw about in the center and up at an angle.....where the glass
weather-strip goes!   The screw holds the two halves of the trim together
and is across from where the overlap bump is on the outer trim at the top.

Joe
-----Original Message-----
From: CHARLES_A._CLARK@HUD.GOV <CHARLES_A._CLARK@HUD.GOV>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Wednesday, November 21, 2001 6:18 AM
Subject: [oletrucks] door window opening trim


>I bought a used door and received it yesterday but it lacks something.  The
>existing door has what appears to be a trim ring (metal, not chrome or ss)
>around the outside of the window opening that appears to be spot welded in.
>The new (old) door does not have this ring but the opening does not look
>like it was damaged in anyway such as would be the case if something was
>spot welded to it and was removed.
>
>Is that trim aroung the window actually spotwelded or is it screwed in? I
>cannot see any tell tale signs of srews or other type of fastener other
>than a spot weld on the existing door.
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>