Jim,
I've got some instructions in Word format I can send you off-line the file
size is about 500K, send me a private e-mail and I'll get them to you.
Ernie
55 Cameo
Novato,CA
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Jim Wilkerson
Sent: Tuesday, June 18, 2002 7:24 AM
To: Ole Trucks (E-mail)
Subject: [oletrucks] Fulton Sunvisor
To the group.
I've got a Fulton sunvisor for my '53 Chevy 1/2 ton pu that I am restoring.
Prior to finish painting, I've mounted this visor on the cab using
directions that were posted via this listing. Overall, the directions are
very good. The directions do not give guidelines regarding the position of
the visor over the cab roof. Mine may be too high. It seems to me that
there may be too much space between the cab roof and the trailing edge of
the visor. The way it sits now, it is about 2" above the cab roof at the
center of the visor (tapering down to less than an inch at the outer edges).
Does anyone know what the correct spacing is for the trailing edge of the
visor and the roof of the cab? It seems to me that the visor will need
enough clearance so that it does not trap air flow and begin acting as a
'spoiler', but too much clearance won't look correct. Any ideas?
Thanks in advance.
***********************************************************************
Jim Wilkerson
***********************************************************************
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|