oletrucks
[Top] [All Lists]

Re: [oletrucks] GMC V8 pistons

To: "Hanlon, Bill \(ISS Houston\)" <Bill.Hanlon@hp.com>,
Subject: Re: [oletrucks] GMC V8 pistons
From: "Joe Garcia" <chevy1@jps.net>
Date: Fri, 22 Nov 2002 07:14:16 -0800
www.kanter.com/  shows everything to build the 347

Joe
----- Original Message ----- 
From: "Hanlon, Bill (ISS Houston)" <Bill.Hanlon@hp.com>
To: "Old Trucks List" <oletrucks@autox.team.net>
Sent: Friday, November 22, 2002 5:52 AM
Subject: [oletrucks] GMC V8 pistons


> Anyone know where one can buy pistons for a 57 GMC 347" V8?  Or even a
> 57 Pontiac 347" V8? 
> If Pontiac, they would need to be the low compression (8.5:1) pistons,
> not the high compression (10.25:1) pistons.   
> 
> Stock piston (including pin and keepers) is GM part # 2371412.  Of
> course this was 1957 only because 347 V8 was only 1957.  Picture in the
> shop manual shows them dished.  
> 
> A guy on a old Pontiac discussion group wants to know.  I sent him
> sign-up instructions to this list.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>