oletrucks
[Top] [All Lists]

Re: [oletrucks] 235 oil pressure questions

To: "Majordomo" <oletrucks@autox.team.net>
Subject: Re: [oletrucks] 235 oil pressure questions
From: "K. M. Lehmann" <klehmann@bentonrea.com>
Date: Tue, 15 Apr 2003 08:21:14 -0700
I suppose this is a late 235, sounds like thrust plate not installed
correctly,although the lobes should be off center of the lifters this makes
the lifters turn as they operate.
Lee
----- Original Message -----
From: "wayne osborne" <wayne@chevytrucks.org>
To: <oletrucks@autox.team.net>
Sent: Tuesday, April 15, 2003 6:25 AM
Subject: [oletrucks] 235 oil pressure questions


> hi folks,
>    I try like hell not to pose question I receive from
> http://www.chevytrucks.org to the list but have to from time to time...
Got
> this email from a guy who got ripped off by the mechanic to rebuilt his
235
> and had to assemble it himself. Question goes like this:
>  >The pressure is high at idle until the engine warms up then drops to 0
to
> 5 >psi. I remember having trouble with installing the cam. ie. lobes
lining
> up >with the lifters. The lifters are not centered on the lobes.
>
> Anybody have any reasoning for the above scenarios or any ideas what he
> missed with the cam install??     Much thanks  --wayne
>
>
>
>
> Wayne Osborne
> http://www.chevytrucks.org
> http://www.chevytrucks.org/wayne
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>