I would vote for etching primer, Get that raw metal protected as fast as you
can, But I live in an area were the humidity is high and you can see rust
overnight??
My two cents
Hoot58
----- Original Message -----
From: <Mikecdk@aol.com>
To: <oletrucks@autox.team.net>
Sent: Thursday, September 25, 2003 7:02 PM
Subject: [oletrucks] 1st time painter's question
> Folks,
>
> OK I've read a ton of books and talked to my auto body materials
> supplier...but its a dead even split....so here's my question!
>
> I have my '46 Chevy cab sanded down to bared metal (36 grit, then 80, then
> 150)....do I put the filler on where needed first? or the etching primer?
>
> This is my 1st attempt at the body work so please make your advice simple!
>
> Thanks!
> Mike
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|