oletrucks
[Top] [All Lists]

Re: [oletrucks] Thread dimensions

To: Ribbit2@aol.com, mark.self@verizon.net
Subject: Re: [oletrucks] Thread dimensions
From: Ribbit2@aol.com
Date: Fri, 14 Nov 2003 10:22:57 EST
Went outside with a thread gauge that was in my tap and die set and measured 
my 57 clevis rod and it is 24 tpi. Hope this is the same as yours. this is 
standard national fine threads. Good luck.
Jim H
57-3100-SB
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>