oletrucks
[Top] [All Lists]

RE: [oletrucks] Ignition key

To: "'wayne osborne'" <wayne@chevytrucks.org>, <KremerRAK@aol.com>,
Subject: RE: [oletrucks] Ignition key
From: "Steve Hanberg" <Steve@OldSub.com>
Date: Wed, 19 May 2004 13:05:18 -0700
I'd have to agree with Wayne, this would be a lot of trouble, and likely
more than its worth.

Reading what Wayne said I was starting to think about how to manage the
process.  But a platform type tow truck could still steal my truck...
Security has to be more than locks.

-----Original Message-----
From: owner-oletrucks@autox.team.net [mailto:owner-oletrucks@autox.team.net]
On Behalf Of wayne osborne
Sent: Wednesday, May 19, 2004 11:36 AM
To: KremerRAK@aol.com; oletrucks@autox.team.net
Subject: Re: [oletrucks] Ignition key

Most of the chips are EEPROM's which is electrically erasable programmable 
read only memory, they can be erased and reprogrammed. Some are just proms 
and are not capable of the reprogramming feature. This would involve some 
serious and I mean serious knowledge of the code scheme involved and not to 
mention the actual program that is installed on the ecm chip. I'd bet my 
last dollar that this is probably proprietary information help by the 
manufactures and without a prom reader, that could read the current program 
on the existing chip and a prom write to be able to manipulate the code to 
take in effect the 93 security chip features. The codes in these type of 
devices are hexidecimal code and is just short of impossible to decipher 
unless you have the programming information. Personally a little more 
trouble that it would ever be worth, in my opinion. Hex codes programming 
in proms looks something like this in a prom:
003A 03BD 43AA  6FAA so you can see how deciphering this would damn near be 
impossible. Only person with the knowledge to alter the inputs and outputs 
of these chips, in my opinion would be the manufacture of the device and 
the department who programmed it.    My suggestion---make sure the locking 
mechanism works on your door, be much cheaper...   --wayne


At 01:17 PM 5/19/04 -0400, KremerRAK@aol.com wrote:
>Can the 1985 ECM be programmed to take advantage of the "chip" in the key 
>on the column for security?  Is this more trouble than it is worth?

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959





<Prev in Thread] Current Thread [Next in Thread>