oletrucks
[Top] [All Lists]

RE: [oletrucks] firewall insulation

To: ccpanel@jps.net, jwleish@yahoo.com, oletrucks@Autox.Team.Net
Subject: RE: [oletrucks] firewall insulation
From: "Carl & Becky Ham" <the_hams@hotmail.com>
Date: Tue, 30 Nov 2004 09:09:24 -0600
Last spring I fabricated a 'fake' firewall cover for my '56 Chevy pickup 
from 14 gage steel and mounted it to the engine-side firewall to cover up 
all the wires, hoses and etc.  I've attached a photo showing the engine 
compartment and the 'fake' firewall cover.

I bought a roll of insulation and aluminium tape for the edges/seams from JC 
Whitney's website.  This insulation is foil on both sides with a dual layer 
closed-cell foam in between.  Does the same thing(insulates heat and sound 
deadener).  It is not as light-weight as the bubblewrap, in fact it is 
downright heavy (probably weighs a pound per square yard).  I used the 
aluminium tape to seal the edges and seams, then attached it to the back of 
the firewall cover with some spray adhesive (also bought from JC Whitney).

I've been very pleased with the results.  Just thought you might want 
another alternative to the foil backed bubble wrap.

Carl Ham
'56 Chevy Stepside Pickup
Sparland, IL

>From: mark <ccpanel@jps.net>
>Reply-To: mark <ccpanel@jps.net>
>To: Jonathan Leishear <jwleish@yahoo.com>, oletrucks@autox.team.net
>Subject: [oletrucks] firewall
>Date: Tue, 30 Nov 2004 02:13:07 -0700
>
>i do HVAC and have tested that triple layer bubblewrap stuff. its a foil
>sandwich with bubblepack in between.
>foil
>bubble
>foil
>bubble
>foil
>
>and not only cuts noise but heat as well. its easilly cut with serrated
>steak knife and stays put even without glue but some sprayglue will keep it
>in tact.
>you can paint it to hide it or leae it.
>i used it floor, firewall, ceiling.
>the only downside ive found over 2 years of use is that it MUST be covered
>with carpet wherever you walk on it-it doesnt like to be ground down. the
>only spot it finally broke down and punched ahole through it was right 
>under
>my gas pedal heel-the rest of the floor has held up fantastic.
>mark
>you can get it in 18,24,36,48" wide rolls.

[demime 0.99d.1 removed an attachment of type image/pjpeg which had a name of 
Milan Show 08-21-2004 004.jpg]

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959





<Prev in Thread] Current Thread [Next in Thread>
  • RE: [oletrucks] firewall insulation, Carl & Becky Ham <=