Bill
Dot 5 is real good for high temp applications, i.e. disk brakes and heavy
equipment with high temperature operating conditions, or high loads like the
big dump trucks used in quarries. For your truck I would use the Dot 3/4
very good fluid, and it will work fine.
Mike 1950 3100
> Hello,
>
> I have my master cylinder in place and all my brakes lines run. I can
> "bench" bleed the master cylinder and proportioning valve seperate from
> the
> lines. Before I do any of that I wanted to ask which brake fluid people
> here
> prefer.
>
> I have only ever used the Dot 3/4 fluid in my other old truck and Austin
> Healey. Since I have a virgin system I thought I would ask before I buy.
>
> I know dot 5 won't eat paint the way dot 3/4 does, but I don't remember
> all
> of the redeeming values of Dot 5. There must be negatives as well.
>
> Thanks in advance for any comments.
>
> Bill Schickling
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|