oletrucks
[Top] [All Lists]

RE: [oletrucks] aluminum radiators

To: "wayne osborne" <wayne@chevytrucks.org>,
Subject: RE: [oletrucks] aluminum radiators
From: "Hanlon, Bill (ISS Houston)" <Bill.Hanlon@hp.com>
Date: Tue, 29 Aug 2006 08:14:34 -0500
I agree that aluminum dissipates heat better, however I've been daily
driving my '57 GMC in Houston's  summer traffic with the A/C running and
have had no problems with overheating since I had a local radiator shop
put a new core in mine in 1995.  The old one was half stopped up and
sprung small leaks once or twice a year.  I had them remove the top and
bottom tanks, throw away the old core and replace it with new.  I run an
overflow recovery tank, a good fan shroud and a 7 PSI (stock) radiator
cap.  A 160 degree thermostat keeps the temp gauge below 175 in all but
the most extreme conditions and I've never seen it over 190.  Engine is
the Pontiac 347" V8 that came in my truck. 

-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net] On Behalf Of wayne osborne
Sent: Tuesday, August 29, 2006 6:21 AM
To: Paul Bytheway; oletrucks@autox.team.net
Subject: Re: [oletrucks] aluminum radiators


Paul,
   That is correct, aluminum dissipates heat better...   --wayne

At 03:18 AM 8/29/2006, Paul Bytheway wrote:
>I have been told that an
>aluminum radiator cools much better and requires less cores than a 
>standard one.





<Prev in Thread] Current Thread [Next in Thread>