oletrucks
[Top] [All Lists]

Re: [Oletrucks] Fuel Gauge Fix

To: "James Hays" <thomasind@nventure.com>, <oletrucks@autox.team.net>
Subject: Re: [Oletrucks] Fuel Gauge Fix
From: "Mac Kinghorn" <kinghorn@watersidewireless.net>
Date: Mon, 8 Aug 2011 09:57:19 -0500
Hello Group

In dealing with fuel systems on my newest project I found out that GM uses
gas gauges set up to operate on a sending unit that is 30 ohm resistance.
If you use an aftermarket system it is more than likely using a sending unit
that has a higher ohm rating.  This will result in your gauge reading wrong.
I would suggest that this is more than likely your problem at this time.

Mac Kinghorn
52 Chevy 1300
61 Chevy C10 SBFS

-----Original Message-----
From: oletrucks-bounces@autox.team.net
[mailto:oletrucks-bounces@autox.team.net]On Behalf Of James Hays
Sent: August 6, 2011 6:17 PM
To: oletrucks@autox.team.net
Subject: [Oletrucks] Fuel Gauge Fix


Don't think my AD ( after market sending & gauge) or boat fuel gauges are
reading correct - anyone have a check list on confirming operation ?



Thanks,

Jim

1954 - 5 window
_______________________________________________

Oletrucks@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/kinghorn@watersidewireless.n
et
_______________________________________________

Oletrucks@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>