[Top] [All Lists]

Re: automotive studs

To: Matt Liggett <>
Subject: Re: automotive studs
From: Derek Harling <>
Date: Sat, 13 Jun 1998 22:54:06 -0400
Matt Liggett wrote:
> Does anyone know of a good, cheap source of automotive studs?  By this I
> mean studs which are fine thread on one end and coarse on the other.  MSC
> only has full fine thread.  I'm finishing up an A-series rebuild for my
> Midget and I had to pay $0.70 apiece for the few I bought at the hardware
> store.  This is for unplated, ungraded steel.  The selection was
> horrible, too.
> --
> <>                                              Matt Liggett
>                                   '60 Mini, '70 Midget, '89 SAAB 900t SPG

I assume there are many hundreds of thousands of BMC A-series head studs
around and I know that better quality ones for racing etc are available
from APT etc.

But if you are still in difficulty email me your requirements [by length
etc] - I've got a boxful in the basement.


<Prev in Thread] Current Thread [Next in Thread>