shop-talk
[Top] [All Lists]

Re: Need speednuts

To: LBC286@aol.com
Subject: Re: Need speednuts
From: "Paul A. Asgeirsson" <Pasgeirsson@worldnet.att.net>
Date: Mon, 28 Oct 2002 12:44:52 -0800
Hi Allen

There are several types of these and if they slip over the edge of sheet metal
they would be called, J-nuts, U-nuts and with a 10 mm nut fastened to this type
they would be called "Metric Extruded "U" Nuts" or foldover nuts.  The last one
is Auveco Part # 17016 for sheet metal thickness of .80 to 2.50mm

I can give you the U or J nut part numbers if he is willing to slightly damage
the threads on the metric or simply use screws.  If he uses wood screws, tell me
what size he'll use.  I stock these for # 10 and #12 screws.  Saves buying a box
of 100!!

Paul A

LBC286@aol.com wrote:

> I need to buy some 10mm speednuts.  You know, the things that slip over the
> edge of sheet metal and provide a captive nut.  My son needs them for some
> stuff he is replacing on his Jeep.  Probably trim type pieces.
>
> He has tried all the large hardware suppliers around here.  Any suggestions
> for an online source for small hardware?  Preferably without a huge shipping
> charge for small orders.
>
> Allen Hefner
> Phila. Region SCCA Rally Steward
> '77 MG Midget
> '75 MG Midget (The Project)
> '92 Mitsubishi Expo LRV Sport
>
> /

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>