-----Original Message-----
From: hello39@idt.net <hello39@idt.net>
To: carolien coulter <carolien@coastalnet.com>
Date: Monday, April 27, 1998 6:38 AM
Subject: Re: flasher unit warning light
>Have the exact same situation and hope to hard mount my bonnet tonite and
see
>if attaching the front wires makes a difference or not, myself.
>Hopefully, i may have the same results as you had.
>Alan
>59 bugeye in RI and headed for Carlisle, Pa and Spriterush98.
>good luck.At least it sounds like you are far enough along to be able to go
to Carlisle;I might make it but I doubt the car will.Carol
>carolien coulter wrote:
>
>> Well, I fixed it but I'm in the same boat as Jeff. I have no clue as to
how
>> I did. The only thing I did was pull the car up to the bonnet and hook up
>> the front(bonnet) wiring harness as well.This didn't work at first, but
>> after looking at it long enough ( this is the only explanation I have)
and
>> tightening the ground on the flasher unit itself all of a sudden the
warning
>> light went out and only came on when the switch was operating like it is
>> supposed to. Lucas maybe????Carol '59 Bugeye.P.S>Thanks everybody
yesterday
>> for all the help. The facia are painted , so putting them on is next.
>
>
>
>
|