spridgets
[Top] [All Lists]

Re: Front suspension advice please

To: Justin Cook <justincook@yahoo.com>
Subject: Re: Front suspension advice please
From: Frank Clarici <spritenut@Exit109.com>
Date: Tue, 05 Jan 1999 17:31:58 -0500
Cc: spridgets@Autox.Team.Net
Organization: Positive Earth Drivers Club
References: <19990105184532.28633.rocketmail@send1e.yahoomail.com>
Reply-to: Frank Clarici <spritenut@Exit109.com>
Sender: owner-spridgets@Autox.Team.Net
Justin

The trunion bushings (top of the pin) will make a huge difference in
steering play. If you do not want to get into the major rebuild, just
replace the trunion bushings for now.

Frank

Justin Cook wrote:
> 
> Thanks to prodding from the list, I put rebuilt shocks on the front of
> my sprite (1966).  I was pleased it was so easy.  In the process I
> found that the four top bushings were missing or toasted.  I am
> wondering if I should just order new bushings or order the whole
> suspension kit in the victoria british catalog.  I know it NEEDS the
> whole thing redone.  However, I'm kind of concerned about a message
> about a month ago talking about a king pin bushing that was supposedly
> very hard to replace (I think I was supposed to give burnt offerings
> to anyone who could do it in two tries...)  I'm not much of a mechanic
> -- this is my second car, and the first I've had to lay hands on.
> 
> Question: given that the front suspension is shot (lots of play when
> grabbing a wheel, I've already replaced the bearings), should I order
> the whole kit?  Does this kit in victoria british (part number 5-309
> major suspension kit) contain this horrible king pin bushing? If it
> contains the bushing, would I lose anything by replacing everything
> BUT the dreaded king pin bushing.  Is it unsafe to drive a car with a
> fair amount of play in one front wheel?

-- 
Frank Clarici
Toms River, NJ
Lots of LBCs
http://www.exit109.com/~spritenut

<Prev in Thread] Current Thread [Next in Thread>