spridgets
[Top] [All Lists]

Re: Disc conversion

To: "Andrew Griffith" <Andrew.Griffith@ReadRite.com>, "'Christopher Palmer'" <ctp@gbn.org>, <spridgets@autox.team.net>
Subject: Re: Disc conversion
From: "Mike Gigante" <mikeg@vicnet.net.au>
Date: Thu, 14 Jan 1999 10:19:33 +1100
Reply-to: "Mike Gigante" <mikeg@vicnet.net.au>
Sender: owner-spridgets@autox.team.net
The master cylinders are different for disc brake cars. You should
swap the M/C, kingpins, stub axles (uprights) as well as the
hubs.

Mike

-----Original Message-----
From: Andrew Griffith <Andrew.Griffith@ReadRite.com>
To: 'Christopher Palmer' <ctp@gbn.org>; spridgets@autox.team.net
<spridgets@autox.team.net>
Date: Thursday, 14 January 1999 7:07
Subject: RE: Disc conversion


>I've got a question regarding the earlier single brake line cars that
>originally came with front drums... When the front brakes are converted to
>discs should a different proportioning valve be used when running a
modified
>engine?  Do these early cars even use one? My '62MKII seem to only use a
>"4-way" union.
>
>Thanks,
>-Drew
>
> -----Original Message-----
> From: Christopher Palmer [SMTP:ctp@gbn.org]
> Sent: Wednesday, January 13, 1999 11:29 AM
> To: spridgets@autox.team.net
> Subject: Re: Disc conversion
>
> Technical note -
>
> Many don't realize that the rear brakes on any car provide only
>around
> 30-40% of the braking force applied.  In a car as light as a
>spridget, for
> street use, drums are plenty on the rear.
>
> ctp
>
>
> At 9:30 AM -0800 1/13/99, Ulix Goettsch wrote:
> >On Wed, 13 Jan 1999, Neesham, Ted wrote:
> >
> >> I would like some comments on a conversion of drums to disc. I
>realise the
> >> later Sprites had front discs, but any suggestions for all round
>discs?
> >
> >Not many people do this, because the Spridget is extremely light in
>the
> >rear.  Discs on the rear won't give you much if any improvement in
>total
> >braking.
> >
> >    Ulix                                       __/__,__
>___/__|\__
>
>>..............................................(_o____o_)....<_O_____O_/...
> >                                              '67 Sprite     '74
>X1/9
>
>
>


<Prev in Thread] Current Thread [Next in Thread>