spridgets
[Top] [All Lists]

Re: Heater Control Valves

To: "Jeff Boatright" <jboatri@emory.edu>, <spridgets@autox.team.net>
Subject: Re: Heater Control Valves
From: wizardz@maxinter.net
Date: Wed, 5 May 1999 15:17:52 -0400
Reply-to: wizardz@maxinter.net
Sender: owner-spridgets@autox.team.net
shuts off flow to the core.

Paul Tegler
Twin 73' MGB GTs YB and OB
YB born 8/72 (Primrose Yellow) Yellow BGT
OB born 1/73 (Blaze Red) Orange BGT
North of Annapolis, South of Baltimore
email: wizardz@maxinter.net
http://www.amdyne.net/~ptegler/mgmain.htm
-----Original Message-----
From: Jeff Boatright <jboatri@emory.edu>
To: spridgets@autox.team.net <spridgets@autox.team.net>
Date: Wednesday, May 05, 1999 4:31 PM
Subject: Re: Heater Control Valves


But does this just turn off the flow, or does it still allow flow but
bypasses the core?

> The heater valve from a Mini is a direct replacement for the spigot
> valve on the Sprite.
> It is cable operated, bolts right on the same 2 studs and works well.
> The heater (air) cable can be re-routed to work the heater valve or a
> second cable can be installed.
> --



Jeffrey H. Boatright, PhD
Senior Editor, Molecular Vision
http://www.molvis.org/molvis
Mailto:jboatri@emory.edu
404-778-4113





<Prev in Thread] Current Thread [Next in Thread>