spridgets
[Top] [All Lists]

Re: Studs 'n' hubs

To: Daniel1312@aol.com
Subject: Re: Studs 'n' hubs
From: "Andy Webster" <trunkie@hotmail.com>
Date: Sat, 22 May 1999 14:08:17 GMT
Cc: spridgets@autox.team.net
Reply-to: "Andy Webster" <trunkie@hotmail.com>
Sender: owner-spridgets@autox.team.net
Daniel,
I've done this before but not on a sprite...(a Valiant). I used an air
wrench thingy and the lug nuts to pull them through. They went home quite 
nicely.
Andy

>From: Daniel1312@aol.com
>Reply-To: Daniel1312@aol.com
>To: spridgets@autox.team.net
>Subject: Studs 'n' hubs
>Date: Fri, 21 May 1999 16:38:38 EDT
>
>Hi list,
>
>Anyone have any experience of fitting brand new studs to a new wheel hub 
>(ie
>double bearing conversion at the rear).
>
>If so, how well did the studs go in - big hammer job or what?
>
>
>Daniel1312



<Prev in Thread] Current Thread [Next in Thread>