[Top] [All Lists]

Re: Wishbone Replacement?

To: Chris Kotting <ckotting@iwaynet.net>
Subject: Re: Wishbone Replacement?
From: Mike Maclean <macleans@earthlink.net>
Date: Mon, 12 Jul 1999 12:21:11 -0700
Cc: "Peter C." <nosimport@mailbag.com>, Chuck Ciaffone <chuckc@ibm.net>, spridget list <spridgets@autox.team.net>
References: <378890EE.4C44@ibm.net> <4.1.19990712125329.00bebc10@mailbag.com> <378A35B2.67F9374@iwaynet.net>
Reply-to: Mike Maclean <macleans@earthlink.net>
Sender: owner-spridgets@autox.team.net
  I actually used Eric for my rebushing before I got on the list.  I wanted to 
only save money by NOT buying new lower a-arms, but i wanted my original Bugeye 
a-arms re-installed with no holes for the anti-sway bar.  Have since bought a 
Healey sway bar and have to drill a different hole pattern in the same spot so 
worked out.  Eric did a first class job, he was reasonable and prompt.  Wouldn't
hesitate to use him again.
Mike MacLean-60 Sprite

Chris Kotting wrote:

> I can vouch for Eric Jones.  I got my A-arms (and a bunch of other parts
> and advice) from him.  Reasonable price, solid work, willing to advise,
> and (for me anyway), close enough to just drive up and get stuff.  You
> can look Eric up on the Monster List, but be aware that the Area Code
> recently changed to (740).
> No financial interest, yadda, yadda.
> Chris Kotting
> ckotting@iwaynet.net
> "Peter C." wrote:
> >
> > At 10:46 AM 7/11/99 , Mike Maclean wrote:
> >
> > >   Apple Hydraulics sells the bushes alone if your handy with a brazing
> > >torch. Use a new fulcrum pin for alignment, then throw it away. You've
> > >changed the temper. Or, they will replace them for you.  Send them you
> > >lower a-arms for cores and they will send you replacements.  Peter C. at
> > >NOSImports also does this. (I trust him more).
> > >
> >
> > Mike,
> >         Thanks for the mention, but at present I (we) do not rebush the 
> > Apple seems to do a fine job as does Eric Jones @ Riverside.
> > Peter C

<Prev in Thread] Current Thread [Next in Thread>