spridgets
[Top] [All Lists]

Re: Correct gauge # '62 MKII Sprite

To: Dave.Vrba@am.sony.com, spridgets@autox.team.net, GMari58175@aol.com
Subject: Re: Correct gauge # '62 MKII Sprite
From: Bryan Vandiver <Bryan.Vandiver@Eng.Sun.COM>
Date: Fri, 13 Aug 1999 14:23:23 -0700 (PDT)
Reply-to: Bryan Vandiver <Bryan.Vandiver@Eng.Sun.COM>
Sender: owner-spridgets@autox.team.net
I believe that both the bugeye, and MarkII use the same gauges, is that 
correct??, If 
so, I may have an extra speedo available soon. (got three coming in the mail 
from eBay)

Regards,
Bryan Vandiver
San Jose, CA

>Subject: Re: Correct gauge # '62 MKII Sprite
>To: Dave.Vrba@am.sony.com, spridgets@autox.team.net
>MIME-Version: 1.0
>
>Greetings Dave and list,
>The correct gauges for the 62 AN6 MKII is as follows:
>Speedo:  BMC #  BHA 4210....Smiths #  RN 6126/00
>Tach:  BMC#  BHA 4213.......Smiths# RN 2313/00
>
>The speedo and tach both have black faces with a silver center.  Both have 
>white lettering.  The speedo goes to 100mph. 
>The tach goes from 0-60;  and has printed <<   x 100  3-1
>The speedo should have a translucent blue plastic lens which illuminates when 
>the high beam is on.  It is diamond cut.
>The speedo has a similar plastic lens except it's red.  THis is for ignition.
>Hope this helps
>
>George Marinos
>Sprite MKII AN6
>supercharged
>glen rock, nj


<Prev in Thread] Current Thread [Next in Thread>