spridgets
[Top] [All Lists]

RE: Midget Stereo

To: "Spridgets List" <spridgets@autox.team.net>, "Larry Macy" <macy@bblmail.psycha.upenn.edu>
Subject: RE: Midget Stereo
Date: Sun, 9 Jan 2000 09:04:02 -0800charset="iso-8859-1"
Importance: Normal
Hi Larry,

It is a pretty short depth.  I used to have a Sony in dash CD player in my
Sprite and it was a pretty tight fit.  It was a 6 1/4 inch depth unit.
Someone gave me a tip to try, although I haven't done it yet.  They said to
pull the trim piece from the bulkhead and trace it onto a 3/4 inch piece of
plywood.  Cut it out, cover it in the correct vinyl, and cut a hole for the
hood release, and you've bought yourself another 3/4 inch clearance. Hope
this info helps!

Greg Gowins
'69 Sprite
Dublin, CA

-----Original Message-----
From owner-spridgets at autox.team.net
[mailto:owner-spridgets@autox.team.net]On Behalf Of Larry Macy
Sent: Sunday, January 09, 2000 7:06 AM
To: MG List; Spridgets
Subject: Midget Stereo

I got a gift certitficate for a Stereo for the Midget for Xmas. I wanna
go buy one but I need to know the max depth of the housing before I walk
into the store. I know it is rather short, like in the vicinity of 6",
and I remember that Damark or somebody recently had the dimensions in a
Catalog, I no longer have. (Now that sentence will make an English
Teacher cringe). I went to the Damark site (www1.damark.com) but could
not find a measurement chart.

Any suggestions or help, or am I gonna have to go pull the console and
measure the freaking thing. Not that hard - but not the easiest either.

Thanks

Larry

Larry Macy
78 Midget

Keep your top down and your chin up.

Larry B. Macy, Ph.D.
macy@bblmail.psycha.upenn.edu
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104

 Ask a question and you're a fool for three minutes; do not ask a
question and you're a fool for the rest of your life.


<Prev in Thread] Current Thread [Next in Thread>