spridgets
[Top] [All Lists]

Re: Weber 45 DCOE: Daniel

To: Bryan.Vandiver@Eng.Sun.COM, spridgets@autox.team.net, branch@valinet.com
Subject: Re: Weber 45 DCOE: Daniel
Date: Thu, 20 Apr 2000 08:13:34 EDT
The DCOE pump jet is not adjustable as such (there is no cam action or lever) 
calibration is on jet size or bleed back.

However, It is worth checking the bleed back valve to ensure it is a blank 
otherwise the pump jets pump less!

Daniel1312

In a message dated 19/04/00 22:12:55 GMT Daylight Time, 
Bryan.Vandiver@Eng.Sun.COM writes:

<< I don't know if anyone has suggested this yet, but before you go replacing 
 parts, just check to make sure the accelerator pump is adjusted properly. It 
 might just be that adjustment is too far out, and not squirting enough fuel 
when 
 you  crack the throttle.
 
 Just a thought - Bryan >>

<Prev in Thread] Current Thread [Next in Thread>