Fellow Spridgeteers,
We're covering the spectrum on DCOE style carbs.... While we're at it, anyone
have
a part source for Mikini or Solex side draughts? I have a pair of 48 mm
Solex's if
anyone's interested. Moocho CFM. If you're running a 1380, one of these is
what
you need!
WFO Herb
Keep the sticky side down!
Bryan Vandiver wrote:
> I checked with APT last week, and they do have some parts in stock left over
> from when they used to carry Dellortos. I was able to order new main jets, and
> pump-jets, but he didn't have the venturis I was looking for.
>
> Does any one have a set of 33 or 34 MM venturies for a 40DHLA they'd like to
> part with??
>
> - Bryan
>
> BTW - A 40 is only on the small size if I was using this for 'Racing',
>however
> for the street, it is definitely more than adequate, and sure beats the pants
> off the old SU's:-)
>
> >Subject: Re: Dellorto parts?? (LBC content
> >To: Bryan.Vandiver@eng.sun.com, spridgets@autox.team.net
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7bit
> >
> >Bryan,
> >
> >The Dellorto DHLA carb is now an obsolete carb. As far as I know most of the
> >calibrateable parts are still available new - have you tried APT. A 40 is on
> >the small size for a 1275 - even if the engine spec is standard.
> >
> >Daniel1312
> >
> >Sorry, I do have any jets or stuff - all my spares are DCOE.
> >
> >In a message dated 21/07/00 23:06:43 GMT Daylight Time,
> >Bryan.Vandiver@Eng.Sun.COM writes:
> >
> ><< Anyone out there have some parts for a dellorto DHLA 40 they want to get
> >rid of?
> > I'm running this side draft on my 1275 bugeye, but would like to experiment
> >with
> > some other chokes/jets/etc.
> > If you have any spare parts for this, or even an extra DHLA 40 or 45 you
> >want to
> > get rid of, let me know.
> >
> > Regards
> > Bryan Vandiver
> > San jose, ca
> >
> > PS - if anyone knows of a good parts source let me know too, since the place
> >I
> > used to get all my parts from appears to be gone. >>
|