Hi, Eddie --
Motorhead in Arlington can install and ream the bushings. They should be in
the phone book if you are in that area, and they have a website that you can
find by searching on "Motorhead"
Steve Byers
'73 Midget GAN5UD126009 G
Havelock, NC USA
-----Original Message-----
From Eddie Sheffield <ecsheffield at erols.com>
To: MG List <mgs@autox.team.net>; Spridgets <spridgets@autox.team.net>
Date: Monday, September 04, 2000 11:30 PM
Subject: DC/VA area machine shops?
>I'm afraid I may be needing to rebuild the front end on my Midget -
driver's
>side seems a little loose. Haven't had an inspection yet so don't know if
>it's bad enough to need immediate repair really. But if it does, does
anyone
>know of a good machine shop in the northern VA / DC area that could install
>and ream the bushings? I can handle the rest of the work. I would hope I
>could buy the kit and have the bushings installed for less than the
500+core
>that Moss wants for rebuilt spindles. Or is there a MUCH cheaper source for
>these things?
>
>Thanks!
>
>Eddie
>1971 Midget
>
>
|