spridgets
[Top] [All Lists]

Re: Deep Fried Wiring? All LBC

To: kate & gary <kgb@clipper.net>, spridgets@autox.team.net
Subject: Re: Deep Fried Wiring? All LBC
Date: Fri, 20 Jul 2001 19:15:55 -0700
Kate,

It's common for those rocker switches to fall apart. The plastic base is
snapped into the bezel and this is a common occurance (in my experience).
Sometime the tab that holds it together breaks off or else everything just
gets loose from constant use. When the back fell of it probably touched
ground, hence the smoke. If you can find the inner pieces (a small spring,
a nylon piece and a copper contact) you may be able to reassemble it and
superglue it at the tabs (top and bottom). Make sure you assemble it the
right way around and test that it still works correctly using an ohmeter
before gluing it. Label what wire goes where before you pull them off.

On the bearings... it's not like belly buttons... you need both....'-)

Gerard

At 5:45 PM -0700 7/20/01, kate & gary wrote:
>Help!
>Just turned into my driveway and went to turn off the headlamps, and the
>rocker switch cheerfully rocked back and forth, but my lights stayed on.
>Then I noticed smoke starting to ooze up through the defroster vents and
>from under the dash. A quick disconnect job on the battery seems to have
>solved the immediate crisis, but it would be nice to not have my car
>burn up, especially with me in it. Any suggestions?
>Also, what type of wheelbearings do I need? 1972 Midget with wire
>wheels. NAPA has two different types, and wants to know if I need inner
>or outer.
>Thanks,
>Kate

--
Please visit Four Points Travel -
Discount Online International Travel Reservations
http://www.gerardsgarage.com/fourpoints
To make a reservation please call Toll Free 1-800-272-3253


G G              Gerard Chateauvieux
 E A
  R R        pixelsmith@gerardsgarage.com
   A A
    R G          Pixelsmith  on  Duty
     D E
      S      http://www.gerardsgarage.com



<Prev in Thread] Current Thread [Next in Thread>