spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: bearing clearances, tappets and stuff

from [Unknown] [Permanent Link][Original]
To: SDOliner@aol.com, kturk@ala.net, spridgets@autox.team.net
Subject: Re: bearing clearances, tappets and stuff
Date: Mon, 17 Sep 2001 06:06:35 EDT 
In a message dated 9/16/2001 11:44:44 PM Eastern Daylight Time, 
SDOliner@aol.com writes:


> Does using STP and Oil an OK way to prelube 
> everything, except the cylinder walls?
> 

That is what I use.  A half and half mix of STP and Castrol.  Pretty slick 
stuff.

--David C.
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [midgetsprite] Crossflow Rad & Temp Sensor/ a little LBC 2001 12:16:06 -0500, Unknown
Next by Date:  Re: bearing clearances, OIL PRESSURE, Unknown
Previous by Thread:  Re: bearing clearances, tappets and stuff, Unknown
Next by Thread:  Re: bearing clearances, tappets and stuff, Unknown
Indexes:  [Date] [Thread] [Top] [All Lists]