spridgets
[Top] [All Lists]

Re: Piston Alignment?

To: <SDOliner@aol.com>, <spridgets@autox.team.net>
Subject: Re: Piston Alignment?
Date: Wed, 26 Sep 2001 00:42:03 +0100
References: <137.22423a1.28e25320@aol.com>
David,
look again carefully at the big- end bearing and cap.
It will be "offset" from the centre line of the rod. Where the end
that locates the bearing shell blends into the rod there is more of a
shoulder on one side than on the other.  These "shoulders" should face
each other for pistons 1 and 2 and for 3 and 4.


> Thanks for the scan. However, the pistons I have are different, no
offset and
> there is a bolt that run throught the rod and cap and a nylock not
on the end.



<Prev in Thread] Current Thread [Next in Thread>