Jim -
Another thought. Linking the sway bar ends to the a-arms with Heim joints
(rose joints across the pond) greatly reduces bind-up from bad linkage
angles during cornering.
I got mine from Pegasus Racing Products.
Clay L.
At 12:18 AM 10/13/01 -0400, JARplanner@aol.com wrote:
>As I rebuild (as opposed to restore) my Bugeye, I am thinking I should add a
>front sway bar. Car will have 1380 & 5speed, but will only be on streets, no
>racing (I promise!). What sway bar should I use? Original size from a later
>Spridget (smaller size, but a lot cheaper) or the 3/4" kits available from
>VB, MiniMania, etc. (about $170). Are there any problems with buying a used
>swaybar, or anything I will need to modify to fit one? Is any sway bar
>better than nothing or should I wait until I have money for a good one?
>
>All recommendations, experiences or opinions will be appreciated.
>
>TIA
>
>Jim Rogers
>San Juan Capistrano CA
DISCLAIMER: JPL now requires notice in all electronic communication that
all personal and professional opinions presented herein are my own and do
not, in any way, represent the opinion or policy of JPL.
|