I would definitely NOT weld galvanized unless you really know what you're
doing and have the proper equipment. This could cause some real problems,
pop rivets and epoxy/ fiberglass would work well with the galvanized panels.
But that's just me.
Dan Walters
'63 sprite
'74 midget
Brick, NJ
----- Original Message -----
From Wm. Severin Thompson <wsthompson at thicko.com>
To: <HealeyRic2@aol.com>; <spritenut@Exit109.com>;
<spridgets@autox.team.net>
Sent: Saturday, October 26, 2002 12:27 PM
Subject: Re: Cheap fix floor pans
> Ummm... breathing fumes of galvanized steel would not be a good thing for
> your long term health...
>
> WST
> ----- Original Message -----
> From: <HealeyRic2@aol.com>
> To: <spritenut@Exit109.com>; <spridgets@autox.team.net>
> Sent: Saturday, October 26, 2002 11:09 AM
> Subject: Re: Cheap fix floor pans
>
>
> > FWIW I just read an article in European Car about a guy using galvanized
> > steel for floor pan replacement in his BMW. Article said it was a bear
to
> > weld and he'd never try it again. Maybe somebody with some welding
> > experience can comment.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|