spridgets
[Top] [All Lists]

need some measurements-bugeye

To: spridgets@autox.team.net
Subject: need some measurements-bugeye
Date: Sat, 21 Dec 2002 11:07:16 EST
Hi Listers:

I need some measurements from a good straight bugeye for reference.  My body 
shop guy needs them to make sure my car is straight.  I would appreciate 
anyone who has a bugeye you are confident is straight to send me the 
measurements as follows:
1) top point of the door opening at the rear to the top point of the front of 
the door opening at the corner of the dash (where the aluminum trim strip 
ends)

2) top point of the door opening at the rear to the bottom front corner of 
the door opening, at the outer surface of the car. (a diagonal measurement)

3) top point of the front of the door opening at the corner of the dash (as 
above) to the rear bottom corner of the door opening, at the outer surface of 
the car. (a diagonal measurement)
 
If I could get those measurements from both sides of the car (just for good 
measure, pardon the pun), and get them from several cars, it would be greatly 
appreciated.

Thanks

John O'Brien
'61 bugeye
'65 BJ8

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>