spridgets
[Top] [All Lists]

Re: Finding TDC on 1275?

To: "Frank Clarici" <spritenut@Exit109.com>, "Spridget List" <spridgets@autox.team.net>
Subject: Re: Finding TDC on 1275?
Date: Sat, 31 May 2003 20:58:52 -0500
References: <3ED8E0BF.7000208@earthlink.net> <3ED95AC8.8050402@exit109.com>
> So if you climb under and line up the timing mark, The rotor will be
> pointing to the #1 plug wire on the cap.

Or, of course, it could be 180 degrees out and be pointing at #4. You might
want to pop the valve cover and make sure whether #1 or #4 has both valves
closed to be sure.
David Lieb
RWA Midgets

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>