I would guess that if the car or axle was bent, both wheels would wear. I would
look first to those things specific to that side.
The axle can shift on the springs, but then it would drive sideways, and not
likely wear one tire.
Jim
Charles Christ wrote:
> hmm, shot suspension bushings, a hub bearing gone , a bent wheel or axle, or
> a bent car(not properly fixed after an accident) there are a few to start
> looking into?
>
> chuck
> -----Original Message-----
> From: chuck <cciaffone@earthlink.net>
> To: spridget list <spridgets@autox.team.net>
> Date: Thursday, June 05, 2003 11:35 AM
> Subject: Rear Alignment
>
> >Wot's alignable at the rear wheels?
> >My right-rear tire is worn badly
> >(smoothly, not cupped) on the inside
> >almost down to the wear marks. On the
> >outside wear is fine.
> >
> >chuck
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|