I have a multi-meter. That is how I check my switches as well. I merely was
making a
comment on the lack of "service" in the Moss "Customer Service" dept.
Geoff Branch wrote:
> Brad: Do you have a multi-meter? This sounds like a double pole single throw
> switch to me but I am just guessing from your description. Put the meter on
> ohms, probably the top set of terminals will make contact with the bottom set
>or
> the side set will make contact with the other side set as you turn or flip the
> switch. Might even be kitty corner contact, but I doubt it. O/L means no
> contact; zero ohms means contact. Hope this helps, with apologies if it's too
> basic.
>
> Geoff Branch
> '74 Meejit "Yellow Peril"
> '72 Innocenti 1300 Mini
>
> ----- Original Message -----
> From: "Brad Fornal" <toyman@digitex.net>
> Cc: <spridgets-digest@autox.team.net>
> Sent: Tuesday, February 10, 2004 8:07 PM
> Subject: Re: Fog Lamp Switch
>
> > Moss support, what an oxymoron. Similar to Military intelligence........
> > I feel more secure with jock support!!
> > Unfortunately, since Moss is too ignorant to supply the instructions with
> their
> > Chinese switches, you will just have to try combos till it works. Next time,
> do
> > yourself a favor, buy your switches from one of our three list parts
> suppliers.
> > They are good folks, and a durn sight more helpful than the fatherless Moss
> > phone drones.........
> > Brad
> >
> > Scott Family wrote:
> >
> > > Hi all, I purchased a Fog Lamp Switch from Moss (162-170). It came with
>no
> > > information at all, as I look at the back there are 4 connectors. 2 top,
>2
> > > bottom starting numbered at top left with 1, top right 2, Bottom left 3,
> > > bottom right 4. Can someone clue me in as to what goes to which post.
> > >
> > > Moss support said just keep try in combinations until you get what you
>need.
> > >
> > > Can someone show me the light (pun intended)
|