Forgot to remove trailer...
----- Original Message -----
From "David Riker" <davriker at pacbell.net>
Sent: Sunday, June 27, 2004 7:15 AM
Subject: Re: Seatbelts
> I have the Securon seat belts in my Midget. They are very sensitive.
> bolted in, there are two dials on them with arrows that must point
> for the inertia locks to release the belts. That's not too hard, but what
> is the b*tch is that when you park on a hill, the belts will not release!
> I'm not talking Mt Everest type incline either. ANYthing but the arrows
> pointing exactly up and down, and you can't get the belts out. Also, when
> you put the top up or down, put the top boot on, load luggage behind the
> seat, if you bump the dials, they go out of adjustment and the seat belts
> won't release either.
> Having said that, they are better than the stock seat belts by far.
> ----- Original Message -----
> From: "Adrian Barnes" <firstname.lastname@example.org>
> To: <email@example.com>
> Sent: Sunday, June 27, 2004 6:20 AM
> Subject: Seatbelts
> > When my '75 was being assembled, they said the Securon seatbelts were
> giving them a fit and they gave up installing them. Is that normal? Is
> there a trick to it? I have to get some form of seatbelt in the car, and
> those are normally a pain, I need to just get some lapbelts.
> > --
> > -------------------------
> > Adrian Barnes
> > Knoxville, TN
> > http://www.midgetweb.com
> > --