spridgets
[Top] [All Lists]

RE: Re[2]: Spark Plug Leads

To: "Bill L" <pythias@pacifier.com>
Subject: RE: Re[2]: Spark Plug Leads
Date: Sun, 14 Aug 2005 11:41:52 -0700
Cc: "spridgets" <spridgets@autox.team.net>
Oops... I just checked: it's not Accel, it's Belden (8mm Metallic
Performance Cable GC). I did not buy a generic plug wire set, I made my own
from a spark plug wire reel and the appropriate terminals (bought at NAPA).
Buying a Bosch or NGK set would be the easiest way to go. If you get stuck
and want to make your own set, contact me off list and I'll send you enough
wire to do so.

JLC in San Diego


Bill wrote:       it SHOULDN't be a fuel problem... i know 90% of electrical
       problems are fuel related, and 90% of fuel problems are
       electrical... but..

       i just had the carbs rebuilt (by joe curto), replaced the fuel
       pump, added a pressure regulator (holey) and have a clean fuel
       filter. ...

       the miss is for one shot only, that is, i can feel one plug
       missfire once in a while... (and can see the tach bounce around
       when it happens) that tach action is my clue that its
       electrical in nature. ?  ?              ?

       i'm tracking down some NGK (or Bosch) plug wires now.. what's
       the model# on those ACCELL wires?, or is it a generic 4
       cylinder set?


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.8/71 - Release Date: 8/12/2005





<Prev in Thread] Current Thread [Next in Thread>