spridgets
[Top] [All Lists]

Re: Hub stubs install

To: Phil Nase <nase@ptd.net>
Subject: Re: Hub stubs install
From: John Caffrey <jdc6@Lehigh.EDU>
Date: Fri, 22 Dec 2006 07:51:21 -0500
Hi Phil,
You're welcome to use my hydraulic press.
John
Fogelsville, PA



Phil Nase wrote:
> I only had a few minutes tonight so I decided to do something quick and
> easy.  I have new lug bolt studs that are 3/8" but they won't seat all the
> way in the hub.  They are really a tight fit.  I had to use a torch to get
> the old ones out.  Do I need to do the same putting in the new?  
>
> I'm afraid of whacking them too hard because I don't want to screw up the
> hubs or ruin the splines.  What's the procedure?  Thanks. 
>
> Phil Nase
> Awfull needy in 
> Quakertown, PA
> http://home.comcast.net/~philnasecpa




<Prev in Thread] Current Thread [Next in Thread>