RE: rocker spacing

["Hal Faulkner" <hal@katemuir.com>]

Flounder wrote:

"Ever have to shim the rockers east/west to center the rockers over the
valve
and pushrod?"

If the ratios aren't standard (i.e., changing from 1.3 to 1.5) and you are
using the stock pillars you may find that they must be adjusted in order to
line up.  I think the Mini Spares kits come with pillars that are designed
to avoid this problem and a hardened shaft.  I'll let you know when I get
that far.  Vizard mentions this somewhere in one of the chapters of the
yellow book.

Hal