I looked on the internet and found a customized front end with wide spaced
eyes on it
at:http://www.peterrenn.clara.net/midget.html#stiffening<http://www.peterrenn
.clara.net/midget.html#stiffening>
----- Original Message -----
From: K. Valentine<mailto:kevin@valentinephoto.net>
To: dmg@bossig.com<mailto:dmg@bossig.com>
Cc: Spridgets<mailto:spridgets@autox.team.net>
Sent: Tuesday, March 11, 2008 7:57 PM
Subject: Re: [Spridgets] Semi Charitable Bugeye Restoration
Dave,
It's easy.
Remove the bonnet, front fenders, front cowl, bumper and grille.
(Everything the Bugeye bonnet will be replacing).
Cut or grind the horizontal lip off the outside of each of the inner
(front) fenders.
The Bugeye bonnet is a direct bolt-on to the original hinges in their
original positions.
If you're lucky the bonnet you will have purchased will be straight,
and you won't have the front tires rub ;)
Kevin V.
On Mar 11, 2008, at 10:21 PM, Dave G. wrote:
> Now *that* sounds interesting...
> Is there any info on the list about what work is involved in doing
> that...
> Assuming that Bug-Eye bonnets don't cost an arm and a leg and my first
> born <G>
_______________________________________________
Support Team.Net
http://www.team.net/donate.html<http://www.team.net/donate.html>
You are subscribed as
dodgerodeo2@hotmail.com<mailto:dodgerodeo2@hotmail.com>
http://www.team.net/archive<http://www.team.net/archive>
http://autox.team.net/mailman/listinfo/spridgets<http://autox.team.net/mail
man/listinfo/spridgets>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|