Joe,
First, check the throttle return springs are connected and working
properly and the throttle (butterfly) plates are closing properly.
Kevin V.
On Mar 29, 2008, at 9:32 AM, Joe Lansing wrote:
> After a used motor swap I bolted a different set of
> SU's on and fired up the engine. It immediately revved
> to about 4000rpm and I shut it off. The idle set and
> linkage appears about normal. What can cause this?
> Chokes aren't hooked up.
>
> Is it something weird like the carbs are set really
> rich and I have an air leak at the intake???
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|