I installed mine dry, and the car idles great.
On Fri, Apr 11, 2008 at 10:30 AM, <JMFarley50@aol.com> wrote:
> I just rebuilt the SUs for my 1275. When installing on the engine, do
> leave the gaskets behind the heat shield and on either side of the
> dry, or should I use a sealant on them?
> If a sealant is used, what are your recommendations for type? I have a
> of Permatex "2" non-hardening Form A Gasket Sealant that says it resists
> gasoline and a tube of high temp. RTV silicone that states it is not for
> gasoline contact. Sounds like the Permatex "2" is a possibility.
> Thanks for your feedback,
> John F.
> **************Planning your summer road trip? Check out AOL Travel Guides.
> Support Team.Net http://www.team.net/donate.html
> You are subscribed as firstname.lastname@example.org
DON JULIO 1942
Support Team.Net http://www.team.net/donate.html