[Top] [All Lists]

Re: [Spridgets] Oil Cooler

To: Spridget Chat Group <spridgets@autox.team.net>, Michael Rowe
Subject: Re: [Spridgets] Oil Cooler
From: Bob Van Kirk <racerbob70@yahoo.com>
Date: Thu, 24 Apr 2008 17:30:02 -0700 (PDT)
  Use the lines from an MGB, long enough to run them along the inside fender 
well.  Makes for a much neater appearance....  Fittings are all the same.  I'd 
just replace the oil cooler...

--- On Thu, 4/24/08, Michael Rowe <mdrowe@optonline.net> wrote:

> From: Michael Rowe <mdrowe@optonline.net>
> Subject: [Spridgets] Oil Cooler
> To: "Spridget Chat Group" <spridgets@autox.team.net>
> Date: Thursday, April 24, 2008, 8:23 PM
> My oil cooler has a hole in it at the base one of the
> fittings, probably from twisting a frozen nut.  It may be
> weldable if it could be gotten clean enough.  Any thoughts?
> Also, the hoses that came on it are very short, maybe
> because they have been cut in the middle and pieced back
> together or because they are not standard.  I would rather
> have longer ones, but the catalogue does not specify
> lengths.  Are there choices in lengths or DIY kits that can
> be cut as desired?
> Michael Rowe
> Long Island, NY

Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  
Support Team.Net  http://www.team.net/donate.html



<Prev in Thread] Current Thread [Next in Thread>