spridgets
[Top] [All Lists]

Re: [Spridgets] ZDDP

To: "Larry Daniels" <ladaniels@sbcglobal.net>,
Subject: Re: [Spridgets] ZDDP
From: "Dean Hedin" <dlh2001@comcast.net>
Date: Sat, 14 Jun 2008 02:35:36 -0400
Well,  I read the  Charles Navarro article and I still do not see anything 
that casts MoS2 in a bad light.
I can't find the ZDDP article on Crane Cams site.
What I'd really like to see is a ZDDP vs MoS2 type article.
In any case we are splitting hairs I think...


----- Original Message ----- 
From: "Larry Daniels" <ladaniels@sbcglobal.net>
To: "Dean Hedin" <dlh2001@comcast.net>; <spridgets@autox.team.net>
Sent: Friday, June 13, 2008 11:00 PM
Subject: Re: [Spridgets] ZDDP


> Here is an article by Charles Navarro.  It is written for/about Porches, 
> but
> they are dealing with the same thing we are.  I have talked to him via
> e-mail and in person as well as attended an extensive tech session with 
> him.
> Charles has been studying this for years and has spent thousands and
> thousands of dollars testing different products.  His research is 
> considered
> among the best.
>
> http://www.lnengineering.com/oil.html
>
> If you Google ZDDP, you will get more articles on this than you will ever
> want to read.  Be sure to find out when the recommendations for oils were
> made as they are being re-formulated all the time.  What was good last 
> year
> might not be good this year.
>
> Look for a Crane Cams article.  They had a good one, too.
>
> In any case, read up on/Google Brad Penn Oils.  They are committed to
> supplying the right stuff to our old motors and are one of the premier oil
> suppliers out there.  The high-performance shops in my area are all 
> carrying
> Brad Penn oils now.  (They use flat-tappets in their race motors, too.)
>
> LAD
>
>
>
> ----- Original Message ----- 
> From: "Dean Hedin" <dlh2001@comcast.net>
> To: <spridgets@autox.team.net>
> Sent: Friday, June 13, 2008 9:29 PM
> Subject: Re: [Spridgets] ZDDP
>
>
> OK, Fill me in (or point me in the right direction).  Why is the Zinc
> additive better than a Moly one?
>
>
> ----- Original Message ----- 
> From: "Larry Daniels" <ladaniels@sbcglobal.net>
> To: "Dean Hedin" <dlh2001@comcast.net>; "Bill L" <pythias@pacifier.com>;
> <spridgets@autox.team.net>
> Sent: Friday, June 13, 2008 10:14 PM
> Subject: Re: [Spridgets] ZDDP
>
>
>> Read up on the subject.  Research won't hurt you.
>>
>> I am going with a ZDDP-enhanced oil.  After much reading and talking with
>> tech experts, I am using Brad Penn Racing Oil 20W-50.  A tad more
>> expensive,
>> but not as much as an engine rebuild.  YMMV.
>>
>> LAD
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as ladaniels@sbcglobal.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>