Re: [Spridgets] Troubleshooting advice needed please

[Weslake1330@aol.com]

For people without an air supply I used a valve from a bicycle inner tube  
and a bicycle pump to pressurise it.
 
In a message dated 19/06/2008 03:51:54 GMT Daylight Time,  
spritenut@comcast.net writes:

Get an  old cap, pop off the center cover, drill a 1/4" hole in the 
depressed spot  where the vent hole is, use a rubber tipped blow gun and  
force the  juice thru the system with about 10-15 psi, 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets