spridgets
[Top] [All Lists]

Re: [Spridgets] asking for smoking Engne advice

To: Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] asking for smoking Engne advice
From: Ron Soave <soavero@yahoo.com>
Date: Thu, 14 Aug 2008 14:11:33 -0700 (PDT)
So youse guys remove the rocker pedestals without the rest of the head studs? 
I've never gotten a definitive answer whether that's OK or not.


--- On Thu, 8/14/08, Glen Byrns <grbyrns@ucdavis.edu> wrote:
> Another way is, as as already said, is the rope trick.  Get
> a few feet of 
> fine soft nylon rope smaller in diameter than the plug
> hole.  Feed it in 
> (not all the way, DOH!) and hand turn the engine to push
> the rope pile up 
> against the valves.  Total misuse of a crescent wrench will
> compress the 
> springs enough to get the keepers out and offer a great
> chance for a home 
> lobotomy if the wrench slips.
> ( I guess you could use a proper tool if you have one)
> 
> Glen round-dent-in-forehead Byrns
> 
> 
> > I am told you don't even have to do the plug
> thing.  A friend of mine
> > uses rags that he shoves down the spark plug hole when
> the piston is
> > half way down, then he turns the motor over to TDC
> causing the rags to
> > compress and hold the valve in place.  BE CAREFUL with
> that one so that
> > you are in the proper orientation and don't bend
> open valves.
> >
> > Might be worth checking out before pulling the head.
> >
> >    mike
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as soavero@yahoo.com
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>