spridgets
[Top] [All Lists]

Re: [Spridgets] Best Spridget Clutch for Racing

To: "'Mike/Donna Carpenter'" <mail4carpenters@peoplepc.com>, "Spridgets
Subject: Re: [Spridgets] Best Spridget Clutch for Racing
From: "Norm 2Bs" <twobees@sprynet.com>
Date: Wed, 20 Aug 2008 09:26:28 -0400
Mike:

I've driven in all but 2 US states (OK & KS) & in Europe & I have never seen
such bad drivers nor such poorly designed roads.  Almost every day just in
this Tampa Bay area there is either a hit & run fatality or a motorcycle
fatality.  Never have I seen so many people run red lights.  And, the main
north-south road here, US 19, is 55 mph speed limit, 3 to 4 lanes in each
direction, strip malls on both sides & cross-overs every 500 feet.  Even in
my SUV I don't feel safe there.

The Turner is BRG & 1250 lbs.  With decreased visibility from the right-hand
position, it would be senseless to drive here.

Norm


-----Original Message-----
From: Mike/Donna Carpenter [mailto:mail4carpenters@peoplepc.com]
Sent: Wednesday, August 20, 2008 9:12 AM
To: twobees@sprynet.com; Spridgets Digest; Vintage RacingDigest
Subject: Re: [Spridgets] Best Spridget Clutch for Racing


Norm,

Whats makes driving the RHD Turner in Florida a suicide?  Just curious as I
may move their some day.

Thanks,

Mike C

-----Original Message-----
>From: Norm 2Bs <twobees@sprynet.com>
>Sent: Aug 19, 2008 10:11 PM
>To: Spridgets Digest <spridgets@autox.team.net>, Vintage Racing
>       Digest <vintage-race@autox.team.net>
>Subject: [Spridgets] Best Spridget Clutch for Racing
>
>Greetings All.
>
>I'm just back from a hectic week in Monterey.  While out there, the
>shop working on my Turner (948 A engine & trans) called to tell me the
>clutch was pretty shot.  I won't know what size is in there until I
>pull the engine beginning tomorrow night.  But, I THINK it's a 7-1/4
>inch.  The number on the pressure plate is HA1062.  Anyone know what
>that is?
>
>While I will only be using the Turner for racing as driving a BRG, RHD
>Turner here in Florida would be suicide, I don't necessarily need a
>full-bore racing clutch.
>
>I used the standard heavy-duty Borg & Beck in my MGB & just changed
>discs annually.  That was a car I drove daily & raced a few times for 6
>years.  I haven't found anything comparable yet for the Spridget system
>in the Turner.
>
>Any suggestions?
>
>Thanks in advance.
>
>Norm Sippel
>'59 Turner Mk1


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>