spridgets
[Top] [All Lists]

Re: [Spridgets] Rear drum brakes

To: <lindalnhvt@nhvt.net>, <spridgets@autox.team.net>
Subject: Re: [Spridgets] Rear drum brakes
From: "David Riker" <davriker@nwi.net>
Date: Mon, 29 Sep 2008 20:25:51 -0700
There is very likely a thin "C" clip or circlip holding the wheel cylinder 
to the backing plate.  It doesn't hold the cylinder as tightly as the "E" 
spring clip does, but then again I can never get the darn e clips to work.
David

----- Original Message ----- 
From: <lindalnhvt@nhvt.net>
To: <spridgets@autox.team.net>
Sent: Monday, September 29, 2008 4:49 PM
Subject: [Spridgets] Rear drum brakes


> Another request to the list that knows, please...
> I'm trying to replace the brake cylinder on the left rear (drums) of my 66
> Sprite.  I have it all apart with shoes, springs all free. I see no
> obvious clip on the back of the old cylinder, just a very slight raised
> edge, not close to the thickness of the new spring clip. Fluid line
> already free, bleeder removed.  I can make the cylinder rock slightly, but
> can't get it out. BTW, do I remember past threads about an easier method
> than the spring clip thingy to hold the new one in?
> I've had my head stuffed in the wheel well long enough!
> TIA
> Dick B.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>