Bill,
I am putting mine on again this fall and I used only the carriage bolts on
the inside posts and front lip but I have a 62 I don't think they are the
same.
Lin
On Sun, Sep 28, 2008 at 3:20 PM, Bill L <pythias@pacifier.com> wrote:
> Hello Spridgets,
>
> The parts arrived from MacGregor and the HARD top now sits atop my
> car! Probably a bad time to have done that as the weather is is
> absolutey PERFECT for top down driving, ... anyway....
>
> The front clamps i'm using are from a later soft top, and work just
> fine (thanx Bill M.) I thought i was going to be able to use 1/4-20
> carriage bolts for the side mounts, but i'll have to get longer
> ones. I'm using #10 copper wire right now, just twisted tight. ..
> but what about the REAR mounts? I've come to understand that even
> back then nobody really used 'em, but does anybody have a picture or
> drawing of what they might look like?.. i could have a set fabbed
> up at work IF i had a clue....
>
> TIA
>
>
> --
> Best regards,
> Bill L. mailto:pythias@pacifier.com
>
> '66 Sprite MKIII HAN8L49403 "the red thing"
>
> "They are not answering - we'd better try the knocker," said Tom
> adoringly.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as grunthaner@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|