But is he referring to an external spring or to the spring inside the slave
cylinder?
David Lieb
1972 1960 1974 1973
----- Original Message -----
From: "Peter Caldwell" <peter@nosimport.com>
To: "Michael Rowe" <mdrowe@optonline.net>; "Spridget Chat Group"
<spridgets@autox.team.net>
Sent: Friday, October 24, 2008 13:09
Subject: Re: [Spridgets] More clutch
> You have a spring? NOOOOOOOOOOOOOOOO No spring!
>
> Peter
> ==
> At 12:50 PM 10/24/2008, Michael Rowe wrote:
>>Yes, I have more play than I thought it the clutch pedal, mostly from the
>>bushing. But more to the point, my (new) slave cylinder is not filling
>>all the way. There is still 1/4" of looseness in the _rod_, not the
>>linkage, as though the slave spring is pulling the piston back. It takes
>>1-1.5" of pedal travel just to reach the clutch plate. I could put in a
>>filler to lengthen the rod, but it really makes no sense to me that the
>>cylinder will not fill, unless the slave spring is pulling it back. Is it
>>supposed to?
>>
>>I drove several miles this morning, then decided to bleed the clutch
>>system yet again. No bubbles, but now it won't work at all.
>>
>>Michael Rowe
>>'74 Midget
>>Long Island, NY
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as dbl@chicagolandmgclub.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|